Kart Parts.
Ready to explore.

Precision conical washers for go-kart setups, available in multiple sizes to fit your axle and bolt configuration. Each set includes 10 washers built for durability and consistent performance under load. Multiple size options for standard axle compatibility High-strength construction for lasting performance Ideal for go-kart racing, tuning, and replacements

Anti-Slide Axle Key Set Keep your rear hubs locked in position and make setup changes faster with the Anti-Slide Axle Key Set. Designed to help prevent unwanted hub movement on the axle, these keys make rear width adjustments quicker, more repeatable, and more reliable at the track. Perfect for racers who frequently fine-tune rear track width between sessions or changing track conditions, the system allows you to qui

M8 Ultra Low-Profile Seat Bolt – Wide Head Flush Mount for Go Kart Seats Upgrade your kart setup with this ultra thin M8 seat screw, designed for a clean, flush fit without sacrificing strength. Perfect for racing applications where space and precision matter. Key Benefits: - Ultra-thin head for minimal clearance issues - High-strength, race-ready durability - Precision M8 threading for secure fit - Lightweight and c

Lightweight and durable, this aluminum clamp securely holds throttle components in place for precise adjustments. Built for reliability and easy installation, it’s perfect for both trackside tuning and workshop use. SOLD AS PACK OF 4.

Cable clamp for throttle and brake 2-bolt Steel Throttle/Brake Cable Clamp Material : Steel Sold as a pack of 4

High-strength joint pins designed for secure and reliable fastening in your kart setup. Precision-threaded for a perfect fit and finished for durability against wear and corrosion. Ideal for maintenance, replacements, or keeping spares on hand.

Durable steel tie rod end designed for precise, smooth steering. Features a high-quality spherical bearing, adjustable threaded shaft with lock nut, and a grease fitting for easy maintenance. Reliable performance for consistent control on the track .

Aluminum bead locks provide fast, secure tyre seating and reduce the risk of tyre slip or air loss under hard cornering. Machined from corrosion-resistant aluminum, these bead locks are lightweight for improved unsprung mass and designed for easy mounting and removal during quick pit stops. Sold by 12 pieces

This tire tool assists in Mounting and Dismounting 5" kart tires. Works with Aluminum, Cast, and Magnesium wheels. By far the easiest way to remove and mount your tire. 3 piece kit Scissor tongs Plastic pin locater Steel pin

KR brake pads deliver a robust braking response and stable performance designed for kart racing. Engineered for long life and consistent feel, KR pads suit competitive racers who need repeatable stopping power without unexpected fade. They fit KR brake calipers and many aftermarket systems when dimensions match. Note: Sold individually

OTK brake pads are formulated for kart racing, giving predictable initial bite, consistent stopping power, and controlled wear. Designed to work with OTK calipers and rotor systems but compatible with many setups, these pads help drivers maintain confidence under heavy braking and repeated laps. Note: Sold individually

The MXC type magnesium rim offers a performance-driven upgrade for racers seeking lower rotational mass and increased responsiveness. Magnesium rims provide a balance of lightweight performance and torsional stiffness, improving acceleration and cornering precision. Available in multiple sizes and offsets to suit front or rear applications. Note: Sold individually

A precision-engineered adjustable steering hub that lets you fine-tune steering position and offset for perfect ergonomics and handling. Built from CNC-machined billet aluminum with sealed bearings and stainless hardware, this hub delivers strength, low weight, and lasting corrosion resistance for street, track, off-road, and custom applications. Key features: Multiple adjustment positions for steering geometry tunin

Lightweight, high-performance OTK 50x87mm magnesium rear hub for full-size karts — engineered to reduce rotating mass and improve acceleration, braking and handling.

Full underside protection in a six‑piece skid plate system — shields from impacts and abrasion.

Heavy‑duty rear bumper mounting kit for go‑karts — steel brackets and stainless hardware for a secure, corrosion‑resistant fit on most kart frames.

OTK Style H Foot Support engineered to stabilize your foot placement and improve throttle/brake control. Lightweight, durable and designed for seamless mounting on OTK‑style chassis.

Black plastic chain guard with mounting fasteners.

Single‑piece support bracket for OTK chain guards to ensure secure, rattle‑free mounting.

Genuine OTK front seat support engineered for DD2, KZ and OK chassis. Increases seat rigidity and driver feedback for improved control and comfort on race day.

Seat mounting tool for precise seat bolt torque and hassle‑free installation.

OTK‑style brake disk protector guards rotors from debris and impact while maintaining airflow.

Sturdy radiator support bracket for secure mounting and improved cooling stability.

Universal Mychron and Alfano bracket.

Sturdy steering column support bracket for consistent steering feel and alignment.

Specifications: 60mm diameter 8mm thick Universal 9 hole Black plastic

Precision sprocket holder tool for safe removal and installation of drive sprockets.

HDPE sprocket protector to shield chain and teeth from dirt while offering lightweight durability.

Secure torsion bar clamp to hold torsion bars firmly and prevent slippage under load.

Key features and benefits: Designed for 30mm oval torsion bars (OTK style) — precise fit for consistent handling Prevents torsion bar slippage and preserves chassis alignment Durable, high‑strength construction for track durability Corrosion‑resistant finish for longer service life Lightweight, compact design minimizes added weight Ideal as replacement part or spare for race teams and weekend drivers Specifications:

Secure torsion bar clamp to hold torsion bars firmly and prevent slippage under load.

Pair of steel after market OTK bumper saver Kart bumper savers, also known as bumper protectors or bumper keeps, are accessories designed to provide an extra layer of protection against lose of a rear bumper. These are designed to fit all OTK karts, bolted to chassis and bearing carrier. Fits : Tony Kart Kosmic LN Kart Red Speed EOS Exprit Gillard

Angled 6061 aluminum steering wedge. Install between the steering hub and wheel, to adjust the angle of the steering wheel to increase leverage and driver comfort. This steering wedge is available in both 10 and 15 degree configurations. Anodized aluminum steering wedges come in black, and feature a 6-point bolt pattern that makes fitment to most steering wheels

Engine Lower Mount Clamp for 28/30/32mm frames Material : 6061 Black anodized aluminum

Low profile Engine Lower Mount Clamp for 28/30/32mm frames Material : 6061 Black anodized aluminum The low profile lower engine mount brackets provide a flush fit, giving greater ground clearance

Aftermarket IAME Engine Sprocket. #219 Pitch Size T10 - T11 - T12 Fits the MY09, X30, KA100 and Mini Swift Engines These last longer than OEM IAME gears, great for club racing or practice engines

Transport and store your wheels with confidence. This wheel caddy/carrier is purpose-built to make moving a full set of wheels quick and hassle-free. The design pairs lightweight aluminum with robust steel components for a strong, reliable carrier that’s easy to handle and built to last. When not in use it stows away neatly — some assembly required.

IRIS #219 kart chain has a pitch of 0.375 inches and a roller diameter of 0.306 inches, making it slightly larger than the more common #35 chain. The #219 kart chain is known for its strength, durability, and resistance to stretching, which is important in high-speed racing where power transfer is critical. Its construction consists of solid bushings and rollers, as well as heat-treated pins and side plates, which pr

ID: 16mm OD: 25mm Length (cm) 120*10*10 Wall thickness: 4.5mm with 3 layers Fits : X30 , ROK GP, IAME, Shifter Our silicon radiator kart hose is a high-performance hose used in racing karts to transfer coolant from the engine to the radiator. The hose has a multi-ply construction, consisting of reinforced layers of silicone and fabric, which provide additional strength and resistance to punctures and tears. The hose

This sprocket is made of 6061-T6 aluminum. 6061-T6 and 7075-T6 aluminum are both popular aluminum alloys that are commonly used to make sprockets. Choosing between the two alloys depends on your kart needs and budget. Both products are available here on kartparts.com. 6061-T6 aluminum is a precipitation-hardened alloy that contains magnesium and silicon as its major alloying elements. It is known for its excellent co

Aluminum sprocket guard Suits #219 Sprockets Sizes 185mm - 230mm Sold : each Material : 6061 Anodized aluminum Recommend buying as a pair. Note: Bolt hardware not included

CNC Billet 6061-T6 Aluminum This Metric Sprocket hub fits a axle with both standard machined keys. Standard 134mm (5.25") Bolt Circle Diameter Take a #219 Sprocket Color: Black Available Axle Sizes: 25mm, 30mm, or 50mm

Heavy Duty Front Bumper Clamp These clamps clamp down tightly around the front nerf bars of most racing karts Sold per each Material : Steel

Kart bumper savers, also known as bumper protectors or bumper keeps, are accessories designed to provide an extra layer of protection against the loss of a rear bumper. What's included : Aluminum clamp (option of 28mm/30mm/32mm) Bolt Hardware Two sets of arms ( 2x short and 2x long) Short arms fit most karts, OTK, Kart Republic, Parolin, Birel, Long arms fit kart with longer bumper bolts, IPK, Parga, OK1, Formula K

Black anodized with lengths from 200mm - 280mm Manufactured out of high-grade 6061 aluminum for strength and lightness. Each tie rod is threaded with reverse left-hand threading on one end, and right-hand threading on the other end to allow for expansion and contraction of the tie rod to adjust your toe adjustment sweep. The thread pitch is M8 x 1.25 which fits most European tie rod ends.

Universal M8 kart tie rod. Black anodized with lengths from 200mm - 280mm Manufactured out of high-grade 6061 aluminum for strength and lightnes. Each tie rod is threaded with reverse left-hand threading on one end, and right-hand threading on the other end to allow for expansion and contraction of the tie rod to adjust your toe adjustment sweep. The thread pitch is M8 x 1.25 which fits most European tie rod ends.