PPR Kart Supply.
Ready to explore.

Bully Clutch Plate Bolt

Here are the dimensions including the backspacing: Van-K P-ZERO 6"x6" w/ 2.5" Backspace Van-K P-ZERO 6.5"x6" w/ 2.5" Backspace Van-K P-ZERO 7.25"x6" w/ 2.5" Backspace Van-K P-ZERO 8.25"x6" w/ 3.0" Backspace Van-K P-ZERO 8.50"x6" w/ 3.5" Backspace Van-K P-ZERO 8.75"x6" w/ 3.5" Backspace Van-K P-ZERO 10"x6" w/ 4" Backspace

Here are the dimensions including the backspacing: Van-K P-ZERO 6"x6" w/ 2.5" Backspace Van-K P-ZERO 6.5"x6" w/ 2.5" Backspace Van-K P-ZERO 8.25"x6" w/ 3.0" Backspace Van-K P-ZERO 8.50"x6" w/ 3.5" Backspace Van-K P-ZERO 8.75"x6" w/ 3.5" Backspace Van-K P-ZERO 10"x6" w/ 4" Backspace

Viper Clutch Drum Steel 4-Disc TURBO Uses TURBO pattern drivers.

Performance 8/15° Flip Mount, International Fits International Rail Chassis Top plate flips for 8 degree or 15 degree engine inclination.

Viper Two Disk Six Spring Clutch Silver Plain Finish Lever Support Silver Plain Finish Vented Aluminum Drum Fits 3/4'" Shaft Four Cycle Engines Adjustable stall speed 2 disk 6 spring Big pin and lever for increased durability Does NOT include driver. All industry standard "small pattern" drivers will work. Clutch drivers can be found HERE .

Viper Two Disk Six Spring Clutch Black Anodized Lever Support Fits 3/4'" Shaft Four Cycle Engines Adjustable stall speed 2 Disk 6 Spring Does NOT include driver. All industry standard "small pattern" drivers will work. Clutch drivers can be found HERE .

Viper 6-Spring Clutch (3-Disc) 3/4" 4-cycle Clutch 6 spring 3 disk Adjustable stall speed Silver Aluminum Drum (picture is not accurate) Does NOT come with driver. All industry standard "small pattern" drivers will work. Clutch drivers can be found HERE .

Viper Clutch Lever Dowel Pin

Viper Clutch Weight Lever Stock Small Pin Lever Accepts one #10 Weight Bolt Assembly (not included)

Viper Clutch Spring Retainer Sold individually.

Viper Clutch Spring Adjustment Bolt (10-32 x 3/4" FHCS) This screw is also used to attach the Drive Plate to the Big Bore Viper Clutch. Six screws each are required for both applications.

HIGH PERFORMANCE Clutch Disk Great wear and grip characteristics. Nominal Thickness .120" to .127" Fits all 3.5" Diameter Clutches with 8 slot baskets.

Silencer, Modified Class 1 5/16" only RLV Model B91XLMO Not Legal for LO-206 or other stock classes. Not legal for box stock class.

Left Hand Spindle 8 Degree KPI 1/2" ID Bearings Installed Straight 5/8" shaft....short, for LH oval use only 1.5" Tall Barrel Fits OEM Slack brand karts, but is a great universal spindle.

Viper Big Block clutch key. For the 1" shaft Viper clutch.

.095" steel floater plate for Viper clutches. .095" is the standard (new) plate thickness.

Bully Clutch Spring Height Gauge. Match up clutch springs and set your clutch spring height much more accurately with this handy tool. Measures in .001" increments.

Bully Clutch Driver 11 Tooth These are GENUINE Buller Brand Sprockets.

51 Micron Nylon Element This is by far, the best Fuel Filter available for LO-206 racing as well as Clone class racing where ethanol based fuels are used.

Riser Set (pedals not included) Fits 1.0" Bumper Slugs or bumper tubing.

The newest fuel pump approved for the Briggs LO-206 Engine. Noted by Briggs, that it is an exact replacement for the 808656 pump and only has a different material inside for the demand diaphragm. Will work on any application where the 808656 works.

Briggs Fuel Pump

High Volume Fuel Pump (adjustable orientation). Can be taken apart to index nozzles. This is a generic fuel pump.

This pump is NOT rebuildable. Top Builders claim this pump performs better than the rebuildable version due to its "sealed" chamber.

40mm Rear Axle Bearing Marked "SB208ZZ" Only One Shoulder (with 2 set screws) 40mm ID 80mm OD

Vented 12mm x 200mm Euro Pattern Rotor 200mm OD Fits standard Euro pattern six bolt hub Replacement for VLR Emerald Rotor

Vented 12mm x 210mm Euro Pattern Rotor Fits Euro Standard 6 Bolt Brake Disk Carriers

Black 40mm Brake Disk Carrier Pinch Bolts Included Disk Mounting Hardware Not Included

Rear Wheel Hub 40mm - Select length from pull down Standard Euro 3/58 Pattern Centering Ring Not Included

Standard Euro 3/58 Pattern Centering Ring Not Available Nuts not included. Pinch bolt and studs ARE included. Narrowest Hub offered by RLV for the VLR Emerald 40mm Axle

Black Anodized Aluminum Studs Included 8mm x 1.25 Standard Thread Euro 3/58 Standard Pattern Includes Removable Index Ring Can be slid over 40mm axle for narrowing purposes by removing index ring

Black Anodized Aluminum Studs Included 8mm x 1.25 Standard Thread Euro 3/58 Standard Pattern Includes Removable Index Ring Can be slid over 40mm axle for narrowing purposes by removing index ring

1040mm Length Axle Uses PKT Keys Only (not included)

Swift Three Peg Key for 40mm Axles Fits the AXS040 Series Swift 40mm Axles

Uses AK004 Three Peg Keys (4 Required) Not Included 1040 Length with 3.0mm Wall Thickness Universally Keyed Axles are Black Oxide Coated to reduce rusting and corrosion Swift is no longer etching their branding and identifiers onto the axles

OEM Ridolfi Righetti Pegged Axle Key For the 40mm Ignite Axles we sell Margay OEM Part # 093588

Ridolfi Righetti Brand 40mm Soft Axle Uses the OEM Three Peg Axle Key in all Locations Axle marked S6

Cassette Hanger Bracket Welds to chassis. Has industry standard three bolt pattern.

Metric Axle Cassette Black Anodized Aluminum Fits 80mm OD Bearings Requires 10mm Hardware, NOT included

For use with 10mm Hardware For Cross Adjustment Only Fits Traditional 3 Bolt Pattern For use with 80mm OD Bearings for 40 or 50mm Axles

Speed Karts FLIP Mount (7* or 15*) for PRC RECON & DEUCE Includes Clamps and Hardware

Steel Axle Key Set (1/4" X 3/16") for 32" Zinc Axle Four Piece Set 3/16" Tall x 1/4" Wide Keys

ZINC 34.0" Axle 1.25" (requires 34" Zinc Axle Key Set) - 3/16" tall x 1/4" wide key Yellow Zinc Plated Axle is 3/16" wall thickness (.1875") .190" nominal Axle is pocket keyed for typical OVAL kart usage

ZINC 32.0" Axle 1.25" (requires 32" Zinc Axle Key Set) - 3/16" tall x 1/4" wide key Yellow Zinc Plated Axle is 3/16" wall thickness (.1875") .190" nominal Axle is pocket keyed for typical OVAL kart usage

Ultra Light 8.5" Sprocket Guard Set Black Anodized Aluminum Hardware Not Included For 6 bolt hub.

Replacement Lube Ring Fits the new style Phantom Cassettes (Scythe, Triton JR, Recon, Minecon and Deuce), 2017 to Present Chargers, and Hammer Karts. For 206 bearings. Sold Each, Bearing not included

GTR wheel Silver Select size from drop down.