TPR Engineering.
Ready to explore.

Manufactured from flexible polyurethane, these brake Master Cylinder Cap covers clip over the master cylinder caps to put a slight tension on them and help prevent the cap unscrewing during operation. Available in a variety of colours.

TPR's brand new Patent Pending stub axle. Tune your front end with ease and increased precision. Made from high quality engineering steels and fully TIG welded by hand, each stub is a bespoke item. Custom geometry is available upon request.

Faceshield, no strap required. Universal sizing. A variety of colours are available subject to what we have in stock (filament and what is on hand). If your requested colour is unavailable at time of order fulfilment we will substitute for another colour, close to your request or a variety if multiples. This is a variant of the popular "open brow" shield we were already making. The only difference is the filled in "b

TPR's "remix" of the classic Save Grabber . Open doors, push buttons, turn lavatory locks without touching them with your hands. Helps to reduce contact surface area and hand contact of common surfaces. Easily washable.

Faceshield, no strap required. Universal sizing. A variety of colours are available subject to what we have in stock (filament and what is on hand). If your requested colour is unavailable at time of order fulfilment we will substitute for another colour, close to your request or a variety if multiples. Please note: We are not medical industry or sanitisation experts. All care will be taken to supply these items in a

Polyurethane "mask strap" for anyone who is wearing surgical masks for long periods. Universal sizing. A variety of colours subject to what we have in stock. If your requested colour is unavailable at time of order fulfilment we will substitute for another colour, close to your request or a variety if multiples. Open source design.

Manufactured from flexible polyurethane, these header and manifold covers are a nice, neat solution to stopping the ingress of particles while the exhaust is off the engine.. Available in a variety of colours, and slightly more aesthetically pleasing than a ball of rag or dunny roll shoved in the hole!

These Lens Ball Caliper Stands are custom designed and manufactured in-house by TPR Engineering. Features: 3D Printed from Carbon fibre reinforced plastic 2 caliper sizes available to suit 60-80mm and 100mm lens balls Light weight construction Arca Style tripod mount included

Maxxis Sport Tyres This competition spec tyre provides a good balance between performance, cost and durability. NOTE: Control tyre for KNSW 2019.

Strippers! Finally, strippers that help keep your money IN your wallet! Manufactured from carbon fibre reinforced plastic, TPR's Strippers are designed to be a universal solution to underside chassis protection. Features: Light-weight and hard wearing due to the carbon fibre reinforced construction 3D Printed, allowing for hollow internal with infill matrix (excluding the wear face) Designed for universal fitment Sup

TPR Axle Spacers offer the next level in rear track setup. Features: Sizes in millimetres embossed in the perimeter for easy identification Available in colour by size (each size is a different, matching colour for even easier identification). Each set comes with a handy "cheat sheet" to take care of the maths for you.

AMV magnesium wheels are the result of years of research and development in magnesium casting. These wheels are casted with the new AMV low pressure machine, using 100% pure AZ91 magnesium. This allows us to assure no air leaks, even without any powder coating on the wheel surface like other brands. This improves the heat transfer, which is not impeded by any additional surface coatings. All this helps to stabilize t

AMV OXiTECH is an innovative plasma electrolytic anodizing treatment which permits obtaining extraordinary characteristics of protection from corrosion and wear of Magnesium. Main properties of the treatment are: WEAR RESISTANCE Unlike traditional treatments, the process uses high currents which create a plasma on the piece surface. The micro-melting is thus obtained of the oxide layer which mineralises and compacts,

AMV OXiTECH is an innovative plasma electrolytic anodizing treatment which permits obtaining extraordinary characteristics of protection from corrosion and wear of Magnesium. Main properties of the treatment are: WEAR RESISTANCE Unlike traditional treatments, the process uses high currents which create a plasma on the piece surface. The micro-melting is thus obtained of the oxide layer which mineralises and compacts,

Have you purchased the new Prisma tyre gauge, only to realise it comes without a case? We have designed a solution! The TPR polyurethane bump case helps keep the slim profile of the new unit, while offering some protection. Customisation is available - Contact us!

TPR Super Low-Profile seat washers are manufactured from Carbon Fibre reinforced material, making them exceptionally strong and light-weight, which retaining flexibility and conformability. The design allows for the seat bolt to "sink" into the washer when tightened, pulling the washer down against the seat and further reducing the height profile. The end result being that the total height is less than the depth of t

TPR Spherical seat spacers are manufactured from Carbon Fibre reinforced material, making them exceptionally strong and light-weight, which retaining flexibility and conformability. Eliminate misalignment issues with this simple solution! Sold as individual sets of 1 x convex & 1 x concave.

Inlet Port cover manufactured from polyurethane. Suits all engines with "Tillotson style" carby configuration. Including but not limited to: IAME/Sirio/Parilla Comer Merlin Ital Sistem Rotax (100cc real engine, not 125 MAX) PRD Galaxy Vortex Customisation available - Please contact us for details!

Exhaust Port cover manufactured from polyurethane. Suits all engines with 68mm stud centres. Including but not limited to: IAME/Sirio/Parilla Comer Merlin (98 onwards) Ital Sistem Rotax (100cc real engine, not 125 MAX) Customisation available - Please contact us for details!

Manufactured from flexible polyurethane, these carby covers are a nice, neat solution to stopping the ingress of particles while the airbox is off the engine.. Available in a variety of colours, and slightly more aesthetically pleasing than a ball of rag or dunny roll shoved in the venturi!

New AMV magnesium wheels are the result of years of research and development in magnesium casting. These wheels are casted with the new AMV low pressure machine, using 100% pure AZ91 magnesium. This allows us to assure no air leaks, even without any powder coating on the wheel surface. This improves the heat transfer, which is direct and without any obstacles. All this helps to stabilize the tire temperature and pres

AMV magnesium wheels are the result of years of research and development in magnesium casting. These wheels are casted with the new AMV low pressure machine, using 100% pure AZ91 magnesium. This allows us to assure no air leaks, even without any powder coating on the wheel surface like other brands. This improves the heat transfer, which is not impeded by any additional surface coatings. All this helps to stabilize t

TPR Engineering tethering clips offer a simple, neat, and aesthetically pleasing solution to tieing off your wiring, brake lines, cables, and areca great solution to securing fuel lines without pinching or restriction. Made from an extremely durable flexible polyurethane, in a variety of sizes, combinations and colours. "30mm" suits all main chassis rail sizes (Generally 28-32mm). "18mm" suits all smaller tube sizes

PANTHER high-performance-chains are an innovation in the means of getting your horsepower to your wheels. These chain are a standout performer in terms of life, reduced drag and affordability. The production technologies and especially high dynamic strength are setting new standards. The light weight Panther chain is the perfect chain for Cadets and KA4. It is strong enough for KA3/ TAG R, however more horsepower can