Top Kart USA.
Ready to explore.

Dual Temperature Inputs Monitor two critical engine temperatures for optimal tuning and performance feedback. Choose from CHT, EGT, and water temperature sensors and patch cables with inputs in multiple combinations to best suit your tuning and performance monitoring needs. One sensor of your choosing is included; the second is sold separately. New in MyChron6 2T The AiM MyChron6 2T is an advanced kart data logger, s

This new and improved style floor pan will only fit the following chassis models: Dreamer X5 Dreamer X5-KZ

A durable push-to-stop emergency switch designed for electric go-karts and control systems. Press the red button to shut down the system, then twist it to reset. Intended for use in our 48V MSTEM EV Drivetrain Kits.

(replaces AiM Sports MyChron Expansion Channel Multiplier X80MYCEXP00) The AiM ACC3 Analog CAN Converter is your ticket to unlocking virtually endless expansion for your vehicle’s data acquisition system. Compact, rugged, and easy to integrate, the ACC3 adds up to four fully configurable analog channels—or a mix of two analog and two digital—without using or altering any existing system inputs. Whether you’re trackin

D.25 x 20mm Wheel Spacer - Dreamer X5 Black Anodized.

D.25 x 5mm Wheel Spacer - Dreamer X5 Black Anodized.

D.25 x10mm Wheel Spacer - Dreamer X5 Black Anodized.

Top Kart USA Driver Development session includes coaching of driving fundamentals from basic level to advance national level racing techniques and essentials for competing up front at the national racing events.

Dreamer X5 Brake Hub - V25 D.180x17.5 Floating Style.

Dreamer X5 Brake Disc 180x17.5 Bushing - V25

Dreamer X5 V25 Brake Disc Flange Support D.180x17.5 Floating Style.

1. Intro Experience — $250 Best for: First-time drivers who want to try real outdoor karting without a large time commitment. Includes: Up to 1 hour session time (Translates to ~2-3 on track sessions after track intro.) Kart rental Engine package Fuel Basic driver fitting Basic safety briefing Helmet/safety gear guidance, if needed On-track introduction Basic coaching support Post-session kart inspection. (For if any

IAME PVL Spark Plug Cap

Steering Column Spacer M8 x D.20 x 5mm. Comes installed on following kart models. Mini SR28: 2024-Present Dreamer X5 : 2025 - Present

Introducing our 48V Brushed DC Motor Kit, a powerful and reliable solution designed specifically for MSTEM (Miniature Science, Technology, Engineering, and Mathematics) projects. This kit has been crafted to meet the unique demands of educational endeavors, particularly for the exhilarating EV Grand Prix events taking place across the United States. Key Features: 48V Power : Experience a surge of power with our 48V B

The Alltrax is an advanced controller for DC Series motor projects. Works with all of our brushed motors like the ME0909 , ME0708 ME0709 and ME1003, 1004. * 12-48v Nominal Models 48300, 48400, 48500, 48600 now in stock! Please contact us if interested in the Alltrax 48400, 48500 or 48600. *User Personality Switch Input *USB Programming with Free Software *Contactor Control for main DC power *Optional Fan Panel (stand

Kit Includes (2) - Caliper Piston 27mm ( 10PS27B/B ) (2) - D.27 O-Ring Seal (20GMA27) (2) - 18x5mm Magnet (20MG18) (2) - 18mm Snap Ring Clip (20SGR18)

This airbox cover is a perfect form fit to your IAME KA100 engine package airbox. Designed to control the wet weather from getting into your airbox intake this quality piece will keep your engine running strong in the wet weather racing.

- Great Condition - 2 Events Used - 1.5 Degree Eccentrics (Top) / 1.5 Degree Eccentrics (Bottom) - Seat: Top Kart Silver IMAF Size of Choice. - Kart had a size 4 seat installed. - Magnesium Rear Cassettes - 508/507 bodywork with 2024 Graphics - Setup for Briggs L206 Package with sprocket hub Inbore. Comes with Sprocket Guard as seen in photos.

Dreamer X5 Brake Disc D.180x17.5 - V25

The 509 Fairing panel lower channel plate which mounts to the upper outside section of the driver fairing. This can get cracked upon impact and is replaceable.

Multiple steering wheel angle adjustment points, multiple hub length adjustment holes Works on Most 6 Bolt and 3 Bolt Steering Wheels For 20mm Diameter Steering Shaft

Chassis Description and Specifications The all NEW 2026 Dreamer X5 chassis is the top choice for kart racing, compatible with a wide range of engines. From lower horsepower options like the LO206 and KA100 to higher horsepower engines like the IAME Leopard, X30, and Rotax, this 30mm chassis suits all needs. With the Dreamer X5, drivers of all styles can gain an edge with ease. With a user-friendly tuning process, eve

Dellorto SHA 14-12L - Comer C52 Throttle Slide

Dellorto SHA 14-12L - Comer C52 Top Cover Gasket

The Dellorto Carburetor SHA 14-12L is the original equipment specification carburetor designed specifically for the Comer C50, C51, and C52 engines. Known for its reliable performance and precise fuel delivery, this carburetor ensures optimal engine efficiency and smooth operation. It balances air and fuel mixture accurately to maximize power output while maintaining fuel economy. Ideal for maintaining OEM standards,

Real-Time Monitoring: Shows system power, voltage, current, SOC, parallel status, protection status, and charge/discharge state. Designed for LiTime Golf Cart Series Batteries with RS485 Communication Individual Battery Metrics: Views each battery's current, voltage, temperature, and status. System Control: The display can shut down the entire battery system. System Monitor: Enables comprehensive system-wide performa

This brake caliper model AP-Race 06 comes equipped with the 2022-2025 model SR28 chassis

Fixing Clip D. 1.6 For AP-Race 01 Brake Pad Pin.

New V24 SR28 Mini sprocket carrier 30mm.

This steering column comes equipped in the all new 2025 Dreamer X5 model chassis.

The V25 Dreamer X5 Tie Rod 265mm offers precise steering, so you have accurate maneuverability and control with every turn.

The NEW 509 upper fairing bracket kit comes in a pair with a LH and RH specific brackets.

The newest 2025 update bodywork fairing component 509 is the highest aerodynamic version available on the market. Update your kart with the latest to gain more speed down the long straightaways.

The 2025 KG 509 front nose is the latest version of aerodynamic technology provided to the karting market.

Monitoring your engine’s operating hours is essential for timely maintenance and rebuilds. The Kartech Digital Hourmeter precisely records both individual session times and cumulative engine hours. Easy to install and operational within minutes, it is compatible with 2-stroke and 4-stroke engines alike. INSTRUCTIONS FOR USE: 'TOTAL' mode: Pressing the 'TOTAL' button gives the total amount of running time from the mom

Introducing the Top Kart USA Apex Hat by Race Threads, the ultimate fusion of style and performance for kart racing enthusiasts. Crafted with lightweight, breathable materials, this premium hat is designed to keep you cool under pressure with advanced moisture-wicking technology that effortlessly handles sweat during intense races or casual track days. Its sleek, aerodynamic-inspired design offers a snug, comfortable

For V25 Dreamer X5 AP Race-01 Caliper. Pads sold individually.

The Sparco Seat Pad Kit Pro is engineered to elevate comfort and protection for kart drivers. This kit includes five self-adhesive foam pads compatible with Sparco kart sim seats and most uncovered kart seats, making it ideal for enhancing bare shell seats. By providing additional cushioning, it reduces driver fatigue and helps maintain focus during long races. Easy to install and versatile, the Sparco Seat Pad Kit P

Elevate your visor’s style with the newly designed 2025 Top Kart USA visor strip kit. Featuring updated silver and gold chrome accents, this kit perfectly complements our decal collection for a refined and distinctive appearance.

This New V25 25mm 10.2˚ - 10mm bearing spindle will fit the following chassis models. - 2025 Dreamer X5

Replacement Glass Lens for the Odenthal Aluminum Tuff Case Camera Case

Experience advanced lubrication with Ultra Gel Chain Lube, a high-temperature synthetic chain lubricant designed for motorcycles, go-karts, bicycles, and other chain-driven vehicles. Originally developed for aerospace applications, this cutting-edge lubricant offers exceptional protection, even in high-speed and high-load environments. Whether you're hitting the open road, tearing up dirt trails, or simply commuting,

The SM2 tire combines all our experience with the highest degree of technology, serving the most demanding drivers (including professionals) with durability and great performance, providing pleasure on driving. This tire is in CIK/FIA homologation process. BENEFITS GREAT PERFORMANCE GREAT DURABILITY RECOMMENDED FOR ALL COMPETITION LEVELS SPECIFICATIONS SPECIFICATIONS Model SM SM Homologation 2020/2022 Under process U

With 4 different hour meter orientations and a quick removal feature, the PKT Oppama Hour Meter Cradle offers versatility and convenience to safely secure your engine's hour meter in place.

The NEW mini MK27 upper fairing bracket kit comes in a pair with a LH and RH specific brackets.

The newest 2025 update bodywork fairing component MK27 is the highest aerodynamic version available on the market. Update your kart with the latest to gain more speed down the long straightaways.

This 2025 designed graphic kit is fitted for the fuel tank 3.5L used on 2017-2025 mini chassis. Purchase as a replacement for individual component of kit.

This 2025 designed graphic kit is fitted for the newest version fuel tank 9L used on 2024-2025 adult chassis. Purchase as a replacement for individual component of kit.

This 2025 designed graphic kit is fitted for the KG 360 Chain Guard. Purchase as a replacement for individual component of kit.

This NEW 2025 designed graphic kit fits on the cadet KG Puffo bodywork set. The kit comes complete with the following decals: - Front Nose (Puffo) - Driver Fairing Panel ( Puffo ) - Side Pods ( Puffo )

This 2025 designed fairing graphic kit is fitted for the cadet MK27 style front driver fairing. Purchase as a replacement for individual component of kit.

This 2025 designed graphic kit is fitted for the cadet MK20 style side pods. Purchase as a replacement for individual component of kit.

This 2025 designed nose graphic kit is fitted for the cadet MK20 style front nose. Purchase as a replacement for individual component of kit.

This NEW 2025 designed graphic kit fits on the cadet KG MK27 / MK20 bodywork set. The kit comes complete with the following decals: - Front Nose (MK20) - Driver Fairing Panel ( MK27 ) - Side Pods ( MK20 ) - Fuel Tank Decals (3.5 Liter)

This 2025 designed fairing graphic kit is fitted for the 509 style front driver fairing. Purchase as a replacement for individual component of kit.

This 2025 designed graphic kit is fitted for the 507 style side pods. Purchase as a replacement for individual component of kit.

This 2025 designed nose graphic kit is fitted for the 509 style front nose. Purchase as a replacement for individual component of kit.

This NEW 2025 designed graphic kit fits on the KG 507-509 bodywork set. The kit comes complete with the following decals: - Front Nose (507) - Driver Fairing Panel (509) - Side Pods (507) - Fuel Tank Decals (9 Liter)

D.40 x 10mm plastic seat spacer for setting height of seat on lower supports. Providing a greater distribution with larger diameter spacer for the seat to prevent breakage.

Equipped to dominate the racetrack, the 2025 Top Kart USA Team Dri-Fit T-Shirt is perfect for mechanics and drivers. Experience ultimate comfort during extended event weekends with its soft, moisture-wicking fabric. Plus, its fashionable design will make a statement as you claim the top spot on the podium. **Sizing fits one size smaller than standard sizing. For Example, if you normally wear an adult medium, you woul

10mm x 80mm Spindle bolt fits 2024-2026 SR28 model chassis and 2025-2026 Dreamer X5 model chassis using the Easy Caster / Camber Adjuster Type.

D.40 x 20mm plastic seat spacer for setting height of seat on lower supports. Providing a greater distribution with larger diameter spacer for the seat to prevent breakage.

Kit Includes (1) - Piston 22x41 (10PSP22B/B) (2) - D.22 Rubber Piston Pump Seal (20GME22) (1) D.22 Piston Pump Spring (20MPF) (1) - Master Cylinder Rubber Gasket Cover 55x35 (20GPMA2) (1) - Master Cylinder Plastic Gasket Cover 55x35 (20CPGPMA2) (2) - Conical Bolt M4 x 12 (1) - Button Screw M4 x 6

The 508 Fairing panel lower channel plate which mounts to the upper outside section of the driver fairing. This can get cracked upon impact and is replaceable.

Universal sized kart cover Top Kart factory.

The ultimate racing go kart data logger has arrived! Rev up your racing game with the new and improved AiM MyChron 6 Data Logger. Specifically crafted for avid kart racers seeking to boost their performance, this advanced logger boasts innovative GPS technology, superior lap timing, customizable displays, and seamless integration with Race Studio 3 for top-notch data management. New in MyChron 6 The MyChron 6 now boa

Designed for use with TR2 or X2 transponder plastic holders, this new mounting bracket streamlines the process of attaching your MyLaps transponder to your kart's side nerf bar, providing a simple, efficient, and neat solution. Transponder holder sold separately Includes mounting hardware, fits 20mm OD & 3/4" side nerf bar tubing.

This premium Caster and Camber adjuster makes for easy and simple kart adjustments. With its eccentric adjuster design, you can fine-tune your kart's caster or camber quickly and accurately. Achieve perfect handling with this easy-to-use, durable product. This eccentric will fit the following chassis models: SR30 / Dreamer X5: 2019-2024 / 2025-2026 SR28: 2022-2026 *Fits 22mm Spindle "C" Hole ID

Hex Bolt M8 x 65mm used for mounting D.30 style brake caliper bracket to bearing cassette.

The compact camera designed for motorsports, ideal for karting and club racing. Recording videos with real time data overlay, low distortion 84° camera lens, CMOS Global shutter, automatic start&stop, dimensions 79.9 x 54 x 46.5 mm, display resolution 128x128 pixels, weight 200 g (battery included), video format H.264 1920 x1080 pixels @ 30 fps, 9-15 Volt external power, file storage on SD card up to 2 TB (not includ

The latest Top Kart USA x OFFSET karting suit! Constructed with the driver's comfort and speed as top priority, the premium kart racing suit features a distinctive exterior design and a cozy inner lining. Its breathable exterior zones and elastic fabric in the lower back provide the ideal balance of comfort and flexibility for peak driving performance. Sizing Options: VIEW SIZING CHARTS FOR STANDARD SUITS HERE Youth:

Charger for 48V and 51.2V lithium battery. Wide AC input voltage range: 100-240V, with an 18A-rated charging current, significantly reducing charging time. Lithium battery activation function: Activates BMS-protected battery, prolonging battery lifespan. IP65 waterproof and dustproof rating: Ideal for demanding outdoor environments such as golf carts, RVs, and marine applications. Compact and robust design: Features

Top Quality: adopts top EV grade-A LiFePO4 cells to provide superior stress resistance and heat dissipation, serving you 10+ years and 4000+ cycles@100%DOD. 2C Continuous Discharging: delivers 120A continuous current and 350A (1s) peak discharge current to withstand larger surges and empower carts through any slope. 120A BMS: to protect it from over-current, over-charging, over-discharging, short circuits, and overhe

Odenthal's new EZGP Aluminum Tuff-Kase II for GoPro Hero Cameras. Specifically designed for the GoPro Hero 13, but also fits GoPro Hero 9, 10, 11, 12 Cameras, includes wire tether to secure case to camera mount Tuff-Case 2 is only designed to fit the Odenthal Camera Mount with the Odenthal Anti-Vibration Isolator

The EZGP mount is one of the most intricate products Odenthal has ever come out with. There is a great deal of machining that goes into these pieces. The camera mounts are precisely machined from 6061-T6 Aluminum which is aerospace grade material. Odenthal machines these to very tight tolerances to ensure every assembly fits perfect and won’t fail. They also use the best hardware to prevent rust or anything that co

Odenthal Racing Products Billet Aluminum Go Pro Camera Mount Anti-Vibration Mount is Designed to Help Eliminate the Vibration from the Kart to the Camera. The new Camera Mount Isolator is designed to help dampen the vibration to the camera itself and work in conjunction with an aluminum camera housing. The Camera Mount Isolator has been tested through official Odenthal partner teams and drivers. It has helped solve t

Briggs 206 Carb Slide - Cadet Green .440

This lower bumper support is for the SR28.2 model frame and newer. 390mm center to center tubes. Fits the following chassis: SR28.2 (2023-2024)

- Great Condition - 8 Events Used. New Castle KRA 2024 Championship winning kart. - 1.5 Degree Eccentrics (Top) - Top Kart DSM 112 Alum Front Wheel / DWT 3.125" "Skinny" Rear Wheel - Recently freshened Nick Snell Racing built Comer C50 Engine with 2 race days since rebuild. - Pedal Riser Kit *Contact us today about purchasing and getting quote for freight to send to you!

Latest version updated fuel tank. Fuel Tank fits the 2017 and newer chassis models. Tank has preset screw hole for vent to use if needed for KZ tank. -2017-2018 Twister -2019-2026 SR30 Dreamer models - 2017-2026 KZ Dreamer models

New V24 SR28 Mini rear wheel hub 30 x L.35mm aluminum.

Transform the performance of your Top Kart with the Heel Riser Extender Kit. Through longer 100mm studs, this kit replaces the standard ones and grants even greater adjustability towards the driver, ideal for shorter drivers who require closer pedal positioning. Perfect for young drivers transitioning from the kid kart class, this kit also includes a bar and necessary hardware to minimize pedal movement during use. E

Complete Wiring Harness Kit and components for the 48V EV Grand Prix LiTime Lithium Battery pack. Kit Includes: (1) Harness A (1) Harness B.1

This top strap support is to keep forward and backward motion for the LiTime Lithium battery attaching to the battery side support bar. It mounts overtop the battery and bolts to the the support bar to keep secured.

Special purposed MSTEM E1 model side support bar for LiTime Lithium battery support for Left side of gokart chassis. The spacing between brackets is now updated to 23cm.

Complete Wiring Harness Kit and components for the 48V EV Grand Prix LiTime Lithium Battery pack. Kit Includes: (1) Harness A (1) Harness B Components Pack (1) Emergency Stop Switch Harness (1) On/Off Toggle Switch (1) 5Amp Fuse Block with fuse and Wires (1) Main Fuse Block Holder with Fuse (2) 2G Contactor to Controller Cables (1) Black 16G Contactor to Controller Wire (1) Red 16G Contactor to Controller Wire (1) Oh

Complete Wiring Harness Kit and components for the 48V EV Grand Prix LiTime Lithium Battery pack. Kit Includes: (1) Harness A (1) Harness B.1 (1) Harness B.2 Components Pack (1) Emergency Stop Switch Harness (1) On/Off Toggle Switch (1) 5Amp Fuse Block with fuse and Wires (1) Main Fuse Block Holder with Fuse (2) 2G Contactor to Controller Cables (1) Black 16G Contactor to Controller Wire (1) Red 16G Contactor to Cont

This aluminum 140mm wheel set is the standard wheel that comes with the Kid Kart chassis package.

8" Plastic Sprocket Guard, 2 Piece

Air Filter, 3-1 / 2" X 4" (2-7 / 16 ID) Tapered Chrome End. Enhance your engine's performance with this air filter to replace the Comer C50-52 stock filter. Experience improved air flow and increased power for your kart!

50mm Aluminum Bearing Cassette with 80 I.D for bearing race. This bearing cassette works with the following chassis models: - KZ125 Dreamer - 2024 SR30.2 Dreamer - MSTEM3 EV E1

New 2024 Double Spade steering Shaft fits the 2024 model SR28 chassis.

Complete Lithium Battery Power Pack equipped with 48V / 50Ah energy with internal BMS with bluetooth app connectivity.

E3.12 is a 14mm, 0.375” reach plug with a gasket seat. The patented DiamondFIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use. The unique ground electrode and full-size center electrode also provides optimal performance over an extended product life. A highly recommended plug for running with the Comer C50-52 engine platform for highest performance.

Maxima 927 Castor Oil (Pint / 16oz) Castor based, ester-fortified 2-stroke engine oil designed to ensure maximum performance while providing maximum protection under the most severe conditions. Carbonization and vaporization resistant formulation combines surface-active esters with a highly-refined castor oil to provide excellent film thickness and surface tenacity, protecting cylinder walls, journals and other criti

50mm Rear Wheel Hub L.62 Aluminum

2024 Mini SR28 Steering Shaft Support.

The V24 Mini Tie Rod 220mm offers precise steering, so you have accurate maneuverability and control with every turn.

This New 17mm spindle will fit the 2024 SR28 model chassis.

The SW2 is MG's rain tire, ensuring extreme grip even in situations where everyone and everything is wet. This is a CIK/FIA homologated tire. BENEFITS GREAT GRIP ON WET TRACKS RECOMMENDED FOR RACES UNDER RAIN SPECIFICATIONS Model SW SW Homologation 2020/2022 CIK/FIA CIK/FIA Measures 10 x 4.20 - 5 11 x 6.00 - 5 Classification WET WET L (mm) +- 10 130 180 B (mm) +- 10 105 144 C (mm) +- 5 130 180 d (mm) +- 0 - 1 126.20

For Ven 05/09 Brembo brake system. Pads sold individually. New version pad with more brake co-efficiency under high temperatures.

Lawson Racing Oil is a proprietary oil technology formulated into a complex mixture of friction reducing & extreme pressure lubricants, along with superior anti-foaming & corrosion agents, to create an exclusive formula to enhance engine performance and maximize horsepower and torque. This unique formula also provides superior film strength for maximum protection to help increase part & engine life and has been exten

Includes: (1) Red 175 Series Connector Plug (2) 2G Terminals Product Description High current rating, low resistance The size of the wire a SB contact will accept is the primary limitation of their ability to carry a load. SB connectors will safely handle higher loads or surges, please read the linked data sheets (PDF) for additional information. The contacts are made of highly conductive silver-plated copper for min

Rocket Sprocket Guide Kit for the Rocket Mini Sprockets, Mini Twist Series 7" Outside Diameter Includes (2) Flat Sprocket Guard, Spacer Inserts and Hardware

Fuel tank for fitting onto kid kart when running the Briggs L206 engine package. Measures - 6 1/4" length x 4 3/4" width x 5 1/4" tall to flat top of tank 6 1/2" Wide at Base Mounts, 6 1/8" Tall to Top of Cap.

This 22mm O Ring Style caliper seal fits the older version Twister / Bullet chassis model calipers (2007-2010 era) before newer design with cup seal style.

Direct Spindle Mount wheel bearing 17x30x7 keeps your 112mm DSM wheel rolling free.

6x5x50 Top Kart Mini (cadet) and Kid Kart axle key. This axle key fits for the brake disc hub.

9/16" Stainless Steel Band & Housing, Carbon Steel 5/16" Hex Head Screw. Clamp Size Range 11/16 in. - 1 1/4 in. (18 - 32 mm)

Res Wirewound 470 Ohm 5% 10W ±20ppm/°C Conformal Silicone Ceramic AXL. Fitted with 5/16" Terminal Ends for attaching to contactor.

Aluminum 50mm sprocket carrier with screw holes tapped for keeping bolts static upon changing sprocket with ease.

The SH is the perfect product for drivers and competitions that seek for higher durability while a good performance is demanded. It can be used in the most varied dry track conditions, including short and long term races. This tire is under CIK/FIA homologation process. BENEFITS GREAT PERFORMANCE GREAT DURABILITY RECOMMENDED FOR ALL COMPETITION LEVELS SPECIFICATIONS Model SH SH Homologation 2020/2022 Under process Un

Elevate your style and performance with the 2024 Top Kart USA Trainer Jacket. From the paddock to the stands and everywhere in between, this sleek jacket will keep you comfortable while turning heads. Featuring a full-length zip for warmth and authentic partner logos, it's the essential piece of team kit you need all season long!

Get ready to conquer the race track in the 2024 Top Kart USA Team Dri-Fit T-Shirt! Designed for mechanics and drivers alike, this incredibly soft and moisture-wicking shirt will keep you comfortable during those long event weekends. And with its stylish look, you'll be sure to make a statement as you reach the top of the podium! **Sizing fits one size smaller than standard sizing. For Example, if you normally wear an

Kid Kart Brake Caliper Return Spring. Also this spring can be used as the Adult or Mini Brake Rod tension spring.

Kid Kart Caliper Support Bushing 6x10x14. Spaces the Kid Kart caliper off of the caliper support.

This aluminum 112mm DSM wheel set is the standard wheel that comes with the Kid Kart chassis package.

KG C3 rear bumper replacement end cap component. *Purchased as an individual end cap.

Top Kart USA Monthly Garage Space Rental at Top Kart HQ or Whiteland Raceway Park during race season.

High performance and simple to install header fiber sleeve for the L206 exhaust pipe. 1-1/2" Braided Silencer Sleeve. *Sold by the foot.

Front Disc 154mm for Ven 11 Brembo brake system.

Top Kart Bead Lock individual screw with o-ring.

Plastic Nerf Bar Vibration Insert. For EV MSTEM3 Kart model Nerf Bar Isolation Inserts.

The ME0708 has one of the highest power/weight/dollar available on the market for brush PM motors. This radial motor can pull 100 amps at 48 volts continuously (300amps for 1 minute) and runs in either direction. The max recommended rotor speed is 5000 rpm. This is ideally suited for 24-48 volts. Torque constant of 0.13 Nm per amp. Works with the Alltrax SR controllers or the Sevcon 4Q for built in reversing. Great f

The Alltrax is an advanced controller for DC Series motor projects. Works with all of our brushed motors like the ME0909 , ME0708 ME0709 and ME1003, 1004. * 12-48v Nominal Models 48300, 48400, 48500, 48600 now in stock! Please contact us if interested in the Alltrax 48400, 48500 or 48600. *User Personality Switch Input *USB Programming with Free Software *Contactor Control for main DC power *Optional Fan Panel (stand

DC Contactor Contact Arrangement : 1 Form X, SPST-NO DM Wire Size (AWG): 22 Wire Size (mm²): .34 DC Contactor Contact Current Rating (A): 500 Coil Voltage (Max) (VDC): 48 Product Type Features Terminal Configuration : 10-32 Stud Contactor Type : Sealed Product Category : Electromechanical Relays Product Type : Contactor Product Classification : Relays - Contactors Configuration Features Auxiliary Switch Contact Arran

Complete Wiring Harness Kit and components for the 48V Lead Acid Battery pack. Kit Includes: (1) Harness A (1) Harness B (1) Emergency Stop Switch Harness Components Pack (1) E Stop Switch (1) On/Off Toggle Switch (1) 5Amp Fuse Block with fuse and Wires (1) Main Fuse Block Holder (2) 2G Battery Jumper Cables (2) 2G Contactor to Controller Cables (1) Black 14G Contactor to Controller Wire (1) Red 14G Contactor to Cont

The Interstate SLA1156 12V 35AH SLA Insert battery is a Sealed Lead Acid replacement battery for many UPS backup power solutions, emergency lighting, riding lawn mowers, mobility devices, solar power, and more. The rechargeable battery is maintenance free and features valve regulated technology to eliminate spills and over-pressurization. This battery is approved for all modes of transport and offers efficient connec

Product Description: - PB-6 Style Throttle - 2-Wire 0-5KΩ Potentiometer - Mating Connector Available PB-6 Specifications: - Model: PB-6 (not original CURTIS product, made by a Chinese manufacturer) - Stainless steel case with a built-in microswitch - The potbox is the throttle in an EV - The potbox tells the controller how much input needed by the controller - The potbox's lever arm is attached to the existing accele

Motor mount to fit the ME0708 style pattern motor to a kart specific lower mount plate for easily mounting to your chassis. Includes: (1) Motor Mounting Plate (1) Mounting Hardware Kit

Lead acid battery box mounting with hardware to warehouse the 12V SLA1156 batteries to power the 48V Lead Acid Complete Drivetrain Kit. Each box holds (2) batteries. Includes: (2) Battery Mount Boxes (1) Mounting Hardware Kit

Mounting bracket for supporting the PB-6 throttle potentiometer.

New Style Mounting bracket for supporting the emergency stop switch with bend for mounting to seat post upright.

Special purposed MSTEM E1 model side support bar for lead acid battery box supports.

Set screw for the EV Drive Sprockets. 1/4"- 20 Thread, 1/2" Long

Complete mounting bracket kit for supporting the PB-6 throttle potentiometer. Includes: (1) Mounting Bracket (4) M5 Bolts (8) M5 Washers (4) M5 Polylock Nuts (1) M6 ID x 35 Spacer (1) M6 x 65 Bolt (1) M6 Large Diameter Washer (1) M6 Polylock Nut (2) M6 Uniball joints (1) M6 x 115mm threaded Rod

Top Kart Steering Hub with built in angle for optimum driver comfort. For even more til you can pair this with our 10 Deg Angled Steering Wedge .

KZ Dreamer Front Brake Disc Hub equipped with 25mm bearings. This hub is the same for both sides of chassis.

2 Pack of 350Amp fuse.

Aluminum #35 pitch split sprocket. Available in tooth sizes 53T - 62T.

Drive sprocket keyway 1" x 3/16" x 3/16" which fits inside 7/8" drive shaft for driver sprocket to slide onto and secure with set screw.

Introducing our 48V Brushed DC Motor Kit, a powerful and reliable solution designed specifically for MSTEM (Miniature Science, Technology, Engineering, and Mathematics) projects. This kit has been crafted to meet the unique demands of educational endeavors, particularly for the exhilarating EV Grand Prix events taking place across the United States. Key Features: 48V Power : Experience a surge of power with our 48V B

Front Drive sprocket that mounts to 7/8" bore shaft. The sprocket uses #35 chain size and 3/8" Pitch.

Chassis Description and Specifications The Top Kart EV Electric chassis is the premier kart racing chassis package for the Purdue MSTEM3 project for both High School and Collegiate levels. As a 100% purpose built frame developed for the Electric engine application having battery packs on either side of the kart. We have created a chassis that will handle like a true kart and allow for high and low level tuning adjust

Rear bumper graphic kit. Fits the following chassis models that use the HULK style rear bumper. 2013-2022 Kid Kart, Blue Eagle, SR28

Rear bumper graphic kit. Fits the following chassis models that use the New C3 style rear bumper. 2022-2024 SR30 Models

Wearever Brake Parts Cleaner provides maximum performance in a brake parts cleaner by using a non-chlorinated formula. Powerful blasting spray easily removes grease, oil, dirt and other contaminants. DANGER: Harmful or fatal if swallowed. Vapor harmful. Extremely flammable. Contents under pressure. Keep out of reach of children. Product may not be available in all states due to local laws. Product Features: Professio

WD-40 Multipurpose Lubricant with Smart Straw - Low VOC Formula - Displaces moisture, cleans, lubricates & loosens frozen parts

View current information from Top Kart USA.

Inline Throttle Cable Return Spring, Goes Between Throttle Bracket and Carburetor Swivel.

These battery box clamps are made from aircraft grade 6061 billet aluminum. They are thicker and stronger than the Stock Iame ones so they will last much longer.

Odenthal ODI30/K28 Mount Clamp Set Includes (2) Clamps (2) Bolts I - International Spacing - Engine Mount Rails are 92mm Center to Center K - Kali Spacing - Engine Mount Rains are 90mm Center to Center

Y-TC/TC temperature, 712 7-pin/m to K-style/f*

Y-TC/TR temperature, 712 7-pin/m to K-style/f, 719 4-pin/f *

KG threaded chain guard fitting nut attaches to the chain guard and connects into the upright bracket for quick mount and dismounting.

Air pressure release button Internal gauge damper for more accurate readings and longer life Ultra flexible 14" hose with ball chuck 2" white dial face.

EK Silver Pro #35 Kart Chain 1 Box will give you 120 Links of 45" of superior tensile strength and low wear plus outstanding impact and anti-kinking resistance! This superior chain boasts unbeatable fatigue toughness.

35 Chain Break for increasing or decreasing chain link size to fit your needs.

This aluminum 112DSM/140mm wheel set is the standard wheel set that comes with the Kid Kart chassis package.

This 2022 designed graphic kit is fitted for the fuel tank 3.5L used on 2017-2022 mini chassis. Purchase as a replacement for individual component of kit.

AiM Sports Solo 2 GPS lap timers feature integrated GPS and Glonass receiver. The Solo 2 includes a huge track database that automatically selects the track where you're racing. A powerful Wi-Fi connection allows you to use the Solo 2 as an access point or connect to an existing network. The 10 RBG LED lights clearly show you if you're improving or not, and a 4 GB internal memory allows you to record and view your te

Designed for comfort and functionality, this heel riser kit allows the driver to bring pedals closer to the driver for maximum comfort while allows the legs to be raised up and add clearance above the tie rods. Compatible with the following chassis models: - 2019-2024 SR30 Models - 2024 SR28 model *Pedals and heel stop support for heel riser kit sold separately.

Rocket Sprocket Guide Kit for the Rocket Mini Sprockets, Mini Twist Series 7" Outside Diameter Includes (2) Flat Sprocket Guard, Spacer Inserts and Hardware

Rocket #219 Mini Sprockets for Use with Rocket Mini Sprocket Hub One piece sprocket with single cut, just twist and slip over your axle!

The SW is MG's rain tire, ensuring extreme grip even in situations where everyone and everything is wet. This is a CIK/FIA homologated tire. BENEFITS GREAT GRIP ON WET TRACKS RECOMMENDED FOR RACES UNDER RAIN SPECIFICATIONS Model SW SW Homologation 2020/2022 CIK/FIA CIK/FIA Measures 10 x 4.20 - 5 11 x 6.00 - 5 Classification WET WET L (mm) +- 10 130 180 B (mm) +- 10 105 144 C (mm) +- 5 130 180 d (mm) +- 0 - 1 126.20 1

Mini Brake Clevis D.6x12. Standard with SR28 Brake Rod Kit

Kid kart brake caliper support bracket.

The Interstate SLA1156 12V 35AH SLA Insert battery is a Sealed Lead Acid replacement battery for many UPS backup power solutions, emergency lighting, riding lawn mowers, mobility devices, solar power, and more. The rechargeable battery is maintenance free and features valve regulated technology to eliminate spills and over-pressurization. This battery is approved for all modes of transport and offers efficient connec

48V/20Ah lead acid battery charger. Includes a Series 175 Red Anderson connector on end to quickly connect into harness system and charge all 4 batteries in series.

These contacts are used with the SB Series 175 amp housings and with the 180 amp Powerpole housings.

Spindle for the KZ Model chassis D.25 x 10mm spindle bolt with caliper mounting. - Fits 2019-2023 KZ Model.

Complete Bolt kit for your floorpan mounting hardware. Includes: (6) M6 x 20 Conical Bolt (6) M10 Flat Washer (6) Rubber Floor Pan Washer (6) M6 Flat Washer (6) M6 Nylock Nut

Top Kart USA Hourly Labor Service.

Top Kart USA prepared chassis assembly service.

Have a Cadet kart that you want to put a Briggs LO206 on but the rear seat bar is too far back for a standard sprocket and hub? Well here is your answer! For 30mm Axle, Rocket Sprocket Mini Sprockets Required for Use Includes 6mm and 8mm Wide Keyway Slots

Parolin Front Wheel Hub Aluminum 17mm x L.50

Jecko Racing Seats represent an avant-garde product in the kart world, both for the technology and the design. Standard Silver Seat, Standard Flex.

This bracket fits the Top Kart Brake Caliper 2022 SR28.2 model style.

Top Kart 2023 newly designed Kid Kart spindle type D.17x72. Comes standard on the new Kid Kart chassis models.

This New V23 25mm 10.5˚ - 8mm bearing spindle will fit the following chassis models. - 2017-2018 Twister models - EV STEM Chassis Models

This New V23 25mm 10.5˚ - 10mm bearing spindle will fit the following chassis models. - 2019 - 2024 SR30 Models.

Front Hub L.95 D.25 Aluminum

Rear Wheel Hub 50x90 Aluminum

Bolt on Pedal Riser Kit for Kid Kart.

206 3-fitting catch can made of carbon fiber and aluminum. Easily fastens to the cylinder head between the carburetor and valve cover for a sleek and compact fit! Individual fittings for the carburetor drain and valve/rocker cover breather as well as a third vent hole that MUST remain open at all times for your 206 engine to function properly. Can also be mounted to a motor mount stud if preferred.

Lawson Racing Oil is a proprietary oil technology formulated into a complex mixture of friction reducing & extreme pressure lubricants, along with superior anti-foaming & corrosion agents, to create an exclusive formula to enhance engine performance and maximize horsepower and torque. This unique formula also provides superior film strength for maximum protection to help increase part & engine life and has been exten

Designed for comfort and functionality, this heel rest allows the driver to utilize the stability of the heel rest to help maneuver the chassis in the corner giving them a greater feel for the chassis when cornering. Compatible with the following chassis models: - 2017-2018 Twister - 2019-2023 Mini models

Mini Pedal Adjustment Kit - Bare with no pedals. Mounts directly to frame steering yoke for easy install.

Designed for compatibility with various kart models, our tool offers versatility and adaptability. Its adjustable components cater to different seat sizes and kart configurations, ensuring a seamless fit every time. Whether you're a karting enthusiast, a professional racer, or a karting facility owner, our Seat Mounting Tool is the perfect addition to your toolkit. Not only does our tool enhance the installation proc

ELF HTX 909 is a synthetic lubricant specially developed for 2-stroke competition engines used exclusively in a blend with leaded or unleaded petrol. Thanks to its high content in specially selected ricinus oil, ELF HTX 909 provides exceptional protection against gripping. ELF HTX 909 is used for the following applications: o 2-stroke leaded and unleaded petrol engines running at very high speeds (up to 25,000 rpm) E

Mini Brake Rod 310mm. Standard for SR28 model chassis.

Customize your kart with a Factory Top Kart USA Driver Name Tag Decal. Sold in Pack of 6 name decals. *Put Driver Name In Order Notes at Checkout

Our top of the line factory driving suit is manufactured with driver comfort and speed in mind. With a unique exterior design unlike any other brand and soft inner lining the driver can be comfortable in the kart while also looking the best on track at all times. With breathable exterior zones along with an elastic-like fabric in the lower back section it allows for maximum driver motion. Sizing Options: Youth/Junior

NGK R6254E-105 Spark Plug

Plastic Seat Washer Conical M8x30 Red

Clear with OTK logo Fuel Line M5x10. *Sold per foot.

For Axle Bearing 50mm - M10-1.25 X 10 Set Screw

Complete Fuel Tank - Dreamer KZ/Shifter with vents - 9L

Pre 2014 Mini Complete Fuel Tank - 3L Quick Release Fits chassis models Mini Magnum & Mini Blue Eagle.

OPPAMA PET-3200R Engine Timer Hourmeter The Oppama hour meter counts and records cumulative operating time on your engine, great for determining when your engine needs service or a rebuild Built in reset function!

Kid Kart Upper Bumper Support for mounting MK20 / MK14 nose.

The LV (Low Volume) simply put, is designed to reduce the gas volume that inflates the tire, which in turn allows lower initial tire pressure, promoting lower final tire temperatures. The LV series wheels have thinner walls of a larger diameter, improving heat transfer rates and giving more cooling surface area. This extra cooling capacity helps stabilize and regulate temperature and pressure rise, for better and lon

Douglas Aluminum 5 x 3.125" wheel for Kid Kart. This wheel increases the overall tire circumference.

The SM tire combines all our experience with the highest degree of technology, serving the most demanding drivers (including professionals) with durability and great performance, providing pleasure on driving. This tire is in CIK/FIA homologation process. BENEFITS GREAT PERFORMANCE GREAT DURABILITY RECOMMENDED FOR ALL COMPETITION LEVELS SPECIFICATIONS SPECIFICATIONS Model SM SM Homologation 2020/2022 Under process Un

This brake pad will only fit a Mini (cadet) chassis brake caliper version 2022 model. Brake Pads are sold individually not as a set. This pad is used with the following chassis models: - SR28.2 models This pad fits this model of 2022 Mini Brake Caliper

Kid Kart Sprocket Carrier D.25

Rear Wheel Hub D.25x35 Kid Kart Aluminum.

25mm x 62mm O.D. Kid Kart Axle Bearing.

SR28 V22 Brake Disc Flange Support D.150x13 Floating Style.

KZ Front Hub L.65 x D.40 Magnesium.

Kid Kart Brake Disc Carrier D.25

SR28 V22 Brake Disc Hub D.150x13 Floating Style.

SR28 V22 Brake Disc. D.150x13 Floating Bushing.

SR28 V22 Brake Disc. D.150x13 Floating.

Spindle Bearing M8X26X8. Fits adult 10.5/10.25 degree Spindles.

V22 Kid Kart Side Pod Decal Set - White / Gold / Silver / Chrome Style.

V22 Kid Kart Front Nose Graphic - White / Gold / Silver / Chrome Style.

White Flame Clutch Spring.

Black Flame Clutch Spring.

Complete fuel pickup assembly with ballast and fitting.

SR28 30mm Aluminum Bearing Cassette. Fits mini SR28 chassis models 2019-2026.

Plastic Chain Guard Kid Kart that mounts to Comer C50/51/52 engine 2022 Version.

This rear bumper will fit the Twister, Flash, and Speedy chassis models 2012-2022 which are utilizing the rear bracket system 1000-025-27 . Comes standard on 2022 SR30 & KZ models.

50mm Brake Disc Carrier Floatinjg. Fits the following chassis models. 2012-2016 : Twister Chassis, Carter

Rear Axle 25mm Top Kart original Kid Kart - size 25x950x3

Hoosier Racing Tire is proud to release a new R60B compound designed for Sprint Kart applications. The R60B is the successor to the R60 compound and has been modified to have increased levels of overall traction. The R60B is a medium-hard compound that melds exceptional performance with a more durable tread life. The compound works well on high demanding track conditions that challenge a tire’s ability to perform con

2022 Top Kart steering wheel designed for added high level grip and comfortability.

Spec Air Filter (Green) for Briggs & Stratton L0206/Animal.

Extra Large Washer to assist with preventing seat to crack by dispersing weight across larger support area.

The Hilliard Inferno Flame clutch is fully tunable with optional weights. The optional weights allow the racer to make small adjustments to the engaging speed for optimal performance. The shoes have been designed to reduce chatter and provide smoother engagement. The shoes are lighter than traditional Hilliard clutches which reduces the inertia and include cleaning grooves to collect dirt/debris. The cleaning grooves

428 Billet Chain Break for increasing or decreasing chain link size to fit your needs.

MK20 mini chassis upper fairing bracket support set to mount the MK20 style fairing.

Lower fairing bracket support that fits with the KG 508-507 and MK20 style front fairing panel.

These side pods will only fit the Mini (Cadet) chassis. They can be adapted to older kart versions as well. 2012-2018 Mini Blue Eagle 2019-2022 SR28.1, SR28.2

These side pods will only fit the Mini (Cadet) chassis. They can be adapted to older kart versions as well with the support nerf bars to accommodate the update to this version bodywork. 2012-2018 Mini Blue Eagle 2019-2022 SR28.1, SR28.2

The newest update bodywork fairing component MK20 is the highest aerodynamic version available on the market. Update your kart with the latest to gain more speed down the long straightaways.

The KG MK20 cadet front nose is the latest version of aerodynamic technology provided to the karting market.

The 508 upper fairing bracket reinforcement kit helps stabilize the upper fairing brackets.

The 508 upper fairing bracket kit comes in a pair with a LH and RH specific brackets.

The KG 507 front nose is the latest version of aerodynamic technology provided to the karting market.

The newest update bodywork fairing component 508 is the highest aerodynamic version available on the market. Update your kart with the latest to gain more speed down the long straightaways.

This NEW 2022 designed graphic kit fits on the cadet KG Puffo bodywork set. The kit comes complete with the following decals: - Front Nose (Puffo) - Driver Fairing Panel ( Puffo ) - Side Pods ( Puffo )

This 2022 designed fairing graphic kit is fitted for the cadet MK20 style front driver fairing. Purchase as a replacement for individual component of kit.

This 2022 designed graphic kit is fitted for the cadet MK20 style side pods. Purchase as a replacement for individual component of kit.

This 2022 designed nose graphic kit is fitted for the cadet MK20 style front nose. Purchase as a replacement for individual component of kit.

This NEW 2022 designed graphic kit fits on the cadet KG MK20 bodywork set. The kit comes complete with the following decals: - Front Nose (MK20) - Driver Fairing Panel ( MK20 ) - Side Pods ( MK20 ) - Fuel Tank Decals (3.5 Liter)

This 2022 designed fairing graphic kit is fitted for the 508 style front driver fairing. Purchase as a replacement for individual component of kit.

This 2022 designed nose graphic kit is fitted for the 507 style front nose. Purchase as a replacement for individual component of kit.

This 2022 designed graphic kit is fitted for the 507 style side pods. Purchase as a replacement for individual component of kit.